bizhub 501/421/361 (Version 2) 12-49
Utility mode
12
12.6.3 Punch Horizontal Position Adjustment
The horizontal position of punched holes when printing with a Punch setting can be adjusted for each paper
size.
2
Note
[Punch Horizontal Position Adjustment] does not appear if optional finisher and punch unit are not
installed.
!
Detail
For details on the Punch settings, refer to "Punching holes in copies (Punch settings)" on page 3-72.
0 Before making any adjustments, use a Punch setting to print a sample copy. Perform the adjustment
while checking the sample that was created.
1 Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 12-42.
2 Touch [1 System Settings].
The System Settings screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5 Touch [3 Punch Horizontal Position Adjustment].
The Punch Horizontal Position Adjustment screen appears.
To Next Page
Loading...
Need help?
General
