bizhub 501/421/361 (Version 2) 3-63
Basic copy operations
3
3.11 Selecting finishing settings
Various settings can be selected for sorting and finishing copies fed into the copy output tray.
!
Detail
When loading the original into the ADF, copies will be produced according to the specified finishing
method after every page of the original has been scanned, regardless of whether [Sort] or [Group] is
selected as the finishing type.
When placing the original on the original glass, copies are produced as follows according to whether
[Sort] or [Group] is selected as the finishing type.
<If [Sort] is specified>
After all pages of the original have been scanned, copies will be produced so that one copy of every
page will be bundled together as one copy. For details on placing the original, refer to "Scanning a
multi-page original from the original glass" on page 3-15.
<If [Group] is specified>
Each time one page of the original is scanned, the specified number of copieswill be produced for that
page.
2
Note
As the factory default, "Group" is selected.
!
Detail
If no finisher is installed and all of the following conditions are met, printed copies are fed out and sorted
in an alternating crisscross pattern.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the w orientation in one paper tray and with the v
orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.
2
Note
From Administrator Settings mode, the machine can be set so that copies are fed out without being
shifted when the finisher is installed. As a factory default, the machine is set to shift the copies that are
fed out.
For details on specifying settings for shifting copies that are fed out when the finisher is installed, refer
to "System Settings" on page 12-18.
For details on "Center Staple & Fold", refer to "Selecting a folding setting" on page 3-75.
To Next Page
Loading...
Need help?
General
