3
Basic copy operations
3-80 bizhub 501/421/361 (Version 2)
3.14 Scanning the next original to be copied while a copy job is being
printed (next job reservation)
The settings for the next copy job can be specified and the original can be scanned while a copy job is being
printed so that it can be printed once the current copy job is finished.
0 Up to 95 copy jobs, including the current copy job, can be reserved.
0 A copy job can be reserved after scanning of the loaded original is finished. The next job cannot be
reserved while an original is being scanned.
0 To delete a reserved copy job, touch [Job List] in the left panel, and then touch [Job Details]. For details,
refer to "Deleting a job" on page 11-8.
1 When the message "Ready to accept another job." appears while the current job is being printed, an
original can be loaded, and copy settings can be specified for the next copy job.
– For details on positioning the original, refer to "Feeding the original" on page 3-8.
– If the "Copy Operating Screen" parameter in Utility mode is set to "Yes", touch [Next Copy Job]
while printing to display the Basic screen.
– For details on specifying the screen that appears while printing, refer to "Custom Display Settings"
on page 12-21.
2 Press the [Start] key.
3 After the current copy job is finished, the next copy job begins.
To Next Page
Loading...
Need help?
General
