bizhub 501/421/361 (Version 2) 11-3
Managing jobs
11
11 Managing jobs
11.1 Overview of Job List screen
11.1.1 Jobs
Specifying the desired copy settings, then pressing the [Start] key queues the copy operation in this machine.
This queued operation is called a job. In the same way, operations for making scans and computer printouts
are also queued as jobs.
- Jobs that are being performed and the job log can be checked from the Job List screens.
- Jobs are printed starting with the one at the top of the Current Jobs list.
- Jobs are numbered in the order that they were programmed and are queued to be performed (printed).
2
Note
The job number identifies the job; it does not indicate the printing order. In addition, the job number
does not change until the job is deleted.
By using the "Increase Priority" function, the selected job can be moved to the front of the queue so
that it is printed first.
11.1.2 Multi-job feature
While one job is being printed, another job can be queued. A total of 250 jobs can be queued.
The number of jobs possible for each operation is listed below.
*
The values listed above are for reference and may differ from the actual values depending on other settings.
When one job is finished being printed, the next queued job automatically begins.
2
Note
Up to 250 jobs, including print jobs, scanner transmission jobs, fax transmission jobs and received
fax/save jobs, can be queued.
Operation Number of jobs
Copy 5
Interrupted copy 1
Scan 5
Print 10
Fax (Off Hook TX) 1
Fax (Memory TX) 50
Fax (Timer TX) 20
Fax RX 100
Fax (Polling RX) 1
Fax (Polling TX) 1
Sharing 56
Total 250
To Next Page
Loading...
Need help?
General
