bizhub 501/421/361 (Version 2) 3-67
Basic copy operations
3
3.11.2 Separating copies by pages ("Group" setting)
0 As the factory default, "Group" is selected.
0 If offset sorting is selected while no finisher is installed, printed copies will be fed out and sorted in an
alternating w and v pattern if the following conditions are met.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the w orientation in one paper tray and with the
v orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.
0 If offset sorting is selected while a finisher is installed, printed copies are fed out and stacked on top of
each other with each set shifted to separate it.
1 In the Basic screen, touch [Finishing].
The Finishing screen appears.
2 Touch [Group].
– To separate each set of pages, touch [Yes] under "Offset".
3 Touch [OK].
The Basic screen appears again.
To Next Page
Loading...
Need help?
General
