Kubota L2800 Workshop Manual

H3-S26
L2800, L3400, WSM
TRANSMISSION (HST TYPE)
Gear and Shaft Assembly
1. Remove the spacer mounting screws.
2. Separate the spacer (1) from the transmission case.
3. Remove the 16T gear shaft assembly (2).
4. Remove the pinion shaft assembly (3) and PTO drive shaft
assembly (4).
(When reassembling)
• Apply liquid gasket (Three bond 1208D or equivalent) to joint face
of spacer and transmission case.
W1021874
[4] SERVICING
(1) Bearing, Gear and Shaft
• See page 3-S29, S30.
(2) Differential Gear
• See page 3-S31, S33.
Tightening torque Spacer mounting screw
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.5 to 41.2 ft-lbs
(1) Spacer
(2) 16T Gear Shaft Assembly
(3) Pinion Shaft Assembly
(4) PTO Drive Shaft Assembly
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland

Kubota L2800 Specifications

General

Engine Type	Diesel
Engine Power	28 hp
Type	Compact utility tractor
Rear tire size	11.2-24
PTO Horsepower	23.5 hp
Weight	2, 425 lbs
Drive	4WD
Front tire size	5.00-15 (2WD)