Kubota L2800 Workshop Manual

9-S23
L2800, L3400, WSM
ELECTRICAL SYSTEM
(2) Alternator
Pulley
1. Secure the hexagonal end of the pulley shaft with a double-
ended ratchet wrench as shown in the figure, loosen the pulley
nut with a socket wrench and remove it.
(When reassembling)
W10187280
Rear End Cover
1. Unscrew the three rear end cover screws and the B terminal nut,
and remove the rear end cover.
W10189820
Brush Holder
1. Unscrew the two screws holding the brush holder, and remove
the brush holder (1).
W10190540
IC Regulator
1. Unscrew the three screws holding the IC regulator, and remove
the IC regulator (1).
W10191230
Tightening torque Pulley nut
58.3 to 78.9 N·m
5.95 to 8.05 kgf·m
43.0 to 58.2 ft-lbs
(1) Brush Holder
(1) IC Regulator
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland

Kubota L2800 Specifications

General

Engine Type	Diesel
Engine Power	28 hp
Type	Compact utility tractor
Rear tire size	11.2-24
PTO Horsepower	23.5 hp
Weight	2, 425 lbs
Drive	4WD
Front tire size	5.00-15 (2WD)