MMX8x4-HT series – User's Manual 122
Set the Volume with Exact Value on Advanced Analog In
This command sets the volume in dB. #volume#analogaudio
Command and Response
ç <volume_dB>
æ <volume_dB>
Parameters
<volume_dB>
-80.00; -60.00; -50.00; -40.00; -35.00; -25.00; -20.00; -15.00; -12.00; -9.00; -6.00; -3.00; 0.00; 3.00; 6.00; 10.00.
Example
ç
æ
Set the Volume by Step Value - Volume up
section).
Command and Response
ç
æ
Example
ç
æ
Set the Volume by Step Value - Volume down
section).
Command and Response #balance
ç
æ
Example
ç
æ
Set the Balance on the Advanced Analog In
Command and Response #balance
ç <bal_set>
æ <bal_set>
Parameters
Parameter description Parameter values
<bal_set> Balance setting R1-R6: Right channel, value can be set between 1 and 6.
L1-L6
0: Center
Example
ç
æ
Audio sound will be transmitted to the left channel of the audio output.
INFO:
Command and Response
ç
æ <gain_value>
Parameters
<gain_value> Analog audio input gain in dB.
Example
ç
æ
Set the Gain on the Advanced Analog In
Command and Response
ç <gain_value>
æ <gain_value>
Parameters
<gain_value> The gain value can be set between -12dB and +21dB, in step of 3.00dB. The value is rounded
down if necessary to match with the step value.
Example
ç
æ
To Next Page
Loading...
Need help?
General
