Midas PRO1 User Manual

95
PRO1 Live Audio System
Operator Manual
Chapter 11: Panning
The PRO1 has two main types of panning mode, default and surround. The default
mode comprises stereo and LCR panning formats, and only uses the channels for the
front loudspeakers, while the surround mode includes channels for the rear surround
loudspeakers. For more information, see “Surround panning” on page 86.
The following table shows the panning formats available on the PRO1.
Table 3: Panning formats
Key: L = left; R = right; C = centre; Lr = left rear; Rr = right rear; Ls = left surround;
Rs = right surround; LFE = low frequency effects (usually handled by a subwoofer)
>> To select the panning mode
At the GUI, choose
home
PreferencesGeneral.
Then click the Show tab to open
the Preferences Show screen.
Click the desired panning mode in
the Surround Mode section.
Note: The None option is the
default mode for stereo and LCR
(SIS™) (see Table 3 above).
Stereo panning
The control surface controls for stereo
panning are located in the masters section
of the channel processing area. The pan
control in each masters section may be
switched for either conventional or spatial
imaging system (SIS™) stereo operation via
the ST or SIS switches, respectively.
Panning mode No. of channels Format Channel types
Default 2 Stereo L, R
3 LCR (SIS™) L, C, R
Surround 4 Quad L, R, Lr, Rr
5 LCRS L, C, R, Ls, Rs
6 5.1 L, C, R, Ls, Rs, LFE

Midas PRO1 Specifications

General

Brand	Midas
Model	PRO1
Category	Stereo System
Language	English