Midas PRO1 User Manual

114 Chapter 14: Monitors And Communications
PRO1 Live Audio System
Operator Manual
Signal generator
The signal generator section can output to pink noise (pink noise generator) or sine
wave tone (sinusoidal oscillator), and connect to the internal and external talk buses.
Signal generator controls on the control surface and GUI
The OSC switches (internal and external) are the talk routing switches.
Item Element Description
1 freq control knob Gives continuous adjustment of the sinusoidal
oscillator frequency from 50Hz to 5kHz.
2 1K switch Overrides the swept frequency control (item 1) and
provides a fixed 1kHz tone.
3 PNK switch Overrides the sinusoidal oscillator and converts
output signal to pink noise.
4 OSC (external)
switch
This OSC external switch connects signal generator
output to talk external output XLR.
5 OSC (internal)
switch
This OSC internal switch connects signal generator
output to the control centre’s internal talk and talk
select buses. The internal talk bus can then be mixed
onto any of the control centre’s buses by pressing the
internal talk switches associated with those buses, or
mixed onto a group of buses by activating an internal
talk group (see “Talk osc/routing” on page 115).
6 level control knob Gives continuous adjustment of signal generator peak
output signals from off (4) to +10dB.
1 2 6 5 4
3
6
5
4

Midas PRO1 Specifications

General

Brand	Midas
Model	PRO1
Category	Stereo System
Language	English