266 Chapter 30: Input Channels
PRO1 Live Audio System
Operator Manual
For details of how to select a side chain pick-off point, see “Side chain” on page 265.
Insert
Input channel insert section provides a send and return out of the signal path, primarily
so that an effects device can be added to the signal’s processing. The send destination
and return source may only be set from the GUI screen, although the INS switch can
be found on both the GUI and also in each input fast strip. This section is optional and
assigned on a channel-by-channel basis.
EQ (E zone)
The input channel equaliser (EQ) is a four-band swept parametric EQ (PEQ) that allows
tonal control of the input signal via the parametric EQ section, or E zone, in the input
channel strip. The four bands are treble, hi-mid, lo-mid and bass, with an additional
three shelving modes available for treble and bass. Any combination of the four bands
6 Graph, shows the effects of the side chain filter on the signal.
7 Side chain source field, shows you where the side chain of the compressor/
gate is sourced from. If you see the text “internal” here, it means that the
source is from the channel itself.
Item Description
1 dest button opens the Patching screen from where you can select the
destination of the insert send.
2 source button opens the Patching screen from where you can select the
source of the insert return.
3 INS switch, connects (inserts) returned programme material to the channel
signal path, provided both the insert send and insert return points have
been assigned.
4 Insert return field shows you the source of the insert return.
5 Insert send field has a drop-down list, which shows the destination(s) of the
insert return.
Item Description
To Next Page
Loading...
Need help?
General
