Midas PRO1 User Manual

116 Chapter 14: Monitors And Communications
PRO1 Live Audio System
Operator Manual
Talk mic
The control surface has an internal talk mic that lets you talk to external locations, and
you can also be talked to from an external location.
Internal talk mic
This is located in the talk mic section, and contains the controls for both the internal
talk mic and external talkback functions, which control a talkback microphone
connected to the DL251/DL252 Audio System I/O. The talk mic utilises the compressor
(limiter), which is in the microphone signal path immediately before the talk level
control.
The outputs from the internal mic can be connected to the internal talk bus/talk
external XLR output (see Appendix B “Functional Block Diagrams”).
Talk mic controls on the control surface and GUI
Item Element Description
1 TALK/[TLK]
(internal) switch
This talk internal switch connects the talk mic output
to the control centre’s internal talk system. The
internal talk bus can then be mixed onto any of the
control centre’s buses by pressing the internal talk
switches associated with those buses, or mixed onto
a group of buses by activating an internal talk group
(see “Talk osc/routing” on page 115).
2 TALK/[TLK]
(external) switch
This talk external switch connects the talk mic output
to the talk external output XLR.
1 2
3
4
5
6
1
2

Midas PRO1 Specifications

General

Brand	Midas
Model	PRO1
Category	Stereo System
Language	English