Midas PRO1 User Manual

349
PRO1 Live Audio System
Owner’s Manual
Appendix F: Parameters Affected By
Scope
This appendix shows the parameters that are affected by scope.
Note: The parameter areas for the scopes (store and recall) and the safes are basically
the same. However, the way they are presented in their respective appendices is
different. This may provide you with a useful alternative when referring to this
material, should you prefer one more than the other (see Appendix H "Parameters
Protected By Safes" on page 397).
Introduction
This appendix shows you which parameters are or are not scoped when you select the
parameter sections in the channels, buses, groups, effects and GEQs on the Store
Scope and Recall Scope screens.
There is a section for each area (channel, bus, group, effect and GEQ) on the scope
screen, and these sections are then subdivided according to the processing areas in the
channel strips on the control surface and GUI.
The following diagram shows the default Store Scope and Recall Scope screens, and
the table to the right shows what the symbols in each section represent. In the table
the orange letters in the Ref. column are used in the tables throughout this appendix to
quickly identify the parameter sections.
Ref.
Parameter
section Symbol
A Routing
B All
C Mic Amp
D EQ
E Dyn
F Busses
G Mute
H Fader

Midas PRO1 Specifications

General

Brand	Midas
Model	PRO1
Category	Stereo System
Language	English