292 Chapter 31: Output Channels
PRO1 Live Audio System
Operator Manual
Mixes
Each of the aux and master output channels can send a variable contribution to the
mixes on each of the eight matrix buses. The buses are controlled in pairs via mix
controls that give continuous adjustment (in the range +6dB to off) of sub group levels
sent to matrix mixes. The controls in the mix section (mix and master bays) include
level/pan and level control knobs for each bus pair, whose function (auxes only)
depends on the current bus mode in operation.
The mixes on the outputs are similar in functionality to inputs, except there is no after
fader listen. For details, see “Mixes” on page 269.
Masters
Towards the bottom of each input fast strip are the masters section and pan control,
LCD select button, mute and solo, and the input fader.
For each output, the masters section (mix and master bays) functions in the same way
as for the inputs. For more information, see “Master controls” on page 271.
To Next Page
Loading...
Need help?
General
