Midas PRO1 User Manual

Inputs (input channels) 519
PRO1 Live Audio System
Operator Manual
Inputs (input channels)
This section shows you which input channel parameters are affected by copy through
scenes.
Config sections
This section shows the configuration processing area parameters copied through
scenes.
* Applies to primary and tape inputs.
Item Control Parameter
1 gain/[gain trim] control knob Digital trim level
2
Ø switch
Phase on/off switch
3 Level control knob Direct output level
4 MODE switch Direct output tap-off point: “Post-fade
and mute”, “Pre-mute, pre-processing”
and “Pre-mute, post-processing”
5 stage box control knob* Remote amplifier level
6 Filter switch* (not shown on
the GUI above)
30Hz filter on/off
7 delay control knob Delay time
8 C/O switch
Order of processing: Dyn.
Ins.EQ or
EQ
Ins.Dyn.
9 48V switch* 48V phantom voltage on/off
10 MUTE switch Direct output mute on/off
11 B switch Direct output solo B on/off
6
1
9
9
1
9
8
8
1
2
5
2
2
10
11
4
5
7
3

Midas PRO1 Specifications

General

Brand	Midas
Model	PRO1
Category	Stereo System
Language	English