202 Chapter 22: Events (Automation)
PRO1 Live Audio System
Operator Manual
About the Edit Event window
You can edit the parameters of an event on the GUI in the Edit Event window.
Figure 15: Edit Event window
Item Description
1 Disable Event tick box, for choosing whether the event is missed out
(skipped) during a rehearsal.
2 TEST EVENT button, for executing the selected outgoing MIDI or GPIO
event using the current event parameters.
3 When... section for selecting the parameters that trigger the event.
Displays either one or three drop-down lists, depending on the whether the
event is selected as Outgoing or Incoming, respectively.
4 Time Offset section, for setting the period of time that the event happens
after it has been triggered. Zero = no offset.
5 Then do this... section, for choosing the type of event that you want.
6 Event Parameters section (see the “Programming events” on page 203).
7 CLOSE button, for closing the Edit Event window.
8 Incoming/outgoing selection section, for selecting whether the event is
triggered on the PRO1 or on an external device.
9 Text field, for displaying the user-configured event name.
To Next Page
Loading...
Need help?
General
