Midas PRO1 User Manual

Solo, mute and fader 273
PRO1 Live Audio System
Operator Manual
Solo, mute and fader
Each input fast strip contains the MUTE and SOLO buttons motorised fader. The fader
is replicated in each input fast strip on the GUI and also in the masters processing area
(GUI channel strip). The fader controls the channel signal level and provides instant
feedback of level settings.
Item Description
1 LCD select button.
2 MUTE button, mutes all post-processing signals exiting the channel. In
addition to scene recall, it can also be remotely muted from the auto-mute
masters.
3 SOLO button, activates signal routing to the monitor A or B section of the
control centre (depending on the status of the solo B button) by sending
the input channel signal to PFL mono and AFL stereo buses. The solo
system is auto-cancelling, so that each new solo cancels the last one. Input
solos override any active VCA and bus solos.
This button is a latching type. Give a short press to latch it and a long
press to self-cancel when it is released.
4 Solo B button (GUI only), changes the operation of the SOLO switch so that
it routes signals to the monitor B section of the control centre.
5 Motorised fader.
2
4
3
5
1
2
3
5

Midas PRO1 Specifications

General

Brand	Midas
Model	PRO1
Category	Stereo System
Language	English