332
3.39 iQ Sensor Solution Function
The iQ Sensor Solution function performs the following operation. Note 3.27Note 3.28
Note 3.27
For details of the function, refer to the following.
iQ Sensor Solution Reference Manual
Note 3.28
The iQ Sensor Solution function can be used only with the High-speed Universal model QCPU and Universal model
Process CPU. Before using the function, check the version of the CPU module and the programming tool used. (
Page 465, Appendix 2)
Function Description
Automatic detection of connected device
Detects devices supporting iQ Sensor Solution connected to
the CPU module, and automatically displays them on "List of
devices" and "Device map area" using a programming tool.
System configuration check
Compares the system configuration information displayed on
a programming tool with the actual system configuration, and
checks if they match.
Communication setting reflection
Reflects the communication settings (such as IP addresses)
of devices supporting iQ Sensor Solution on "Device map
area" to the devices connected over Ethernet in the system.
Sensor parameter read/write
Reads/writes parameters from/to devices supporting iQ
Sensor Solution.
Monitoring
Monitors the current values (such as measurement values
and input/output values), status (error existence), and error
information of devices supporting iQ Sensor Solution
graphically using a programming tool.
Data backup/restoration
Backs up the setting data (such as parameters) of devices
supporting iQ Sensor Solution to an SD memory card. The
data backed up can be restored as necessary.
To Next Page
Loading...
Need help?
General
