Native Instruments Maschine MIKRO User Manual

Duplicating a Pattern
To duplicate a Pattern:
1. Press and hold PATTERN to enter Pattern mode.
2. If necessary, use SHIFT + Left/Right Arrow button to select the Pattern bank containing
the Pattern you want to duplicate.
3. Press the pad of the Pattern you want to duplicate.
4. Press F2 (DUPL).
→
A copy of the Pattern is inserted right after the original Pattern in the Pattern bank — all
following Patterns are shifted to the next slot.
Copy and Paste a Pattern
While the duplicating method described above is the quickest one, you can also copy a Pattern
to the Pattern slot of your choice via the DUPLICATE button of your controller:
1. Press and hold PATTERN to enter Pattern mode.
2. Press and hold DUPLICATE.
3. Press the pad of the Pattern you want to copy.
4. Press the target pad for the Pattern copy.
→
The Pattern is copied to the target pad.
This procedure has following benefits:
▪ You can paste the copy into the Pattern slot of your choice — empty or not. If the target
Pattern slot already contains a Pattern, it will be replaced by the copied Pattern.
▪ You can select the target slot in another Pattern bank: After you have selected the source
Pattern, switch to the desired Pattern bank using SHIFT + Left/Right Arrow button before
you select the target Pattern slot.
▪ Last but not least, this command is also available outside the Pattern mode: Simply press
and hold DUPLICATE + PATTERN (instead of DUPLICATE alone in Pattern mode) before
selecting the source and target slots!
Working with Patterns
Managing Patterns
MASCHINE MIKRO - Manual - 394

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English