Native Instruments Maschine MIKRO User Manual

→
The Sound slot now mirrors the Plug-in name.
For more information on renaming Sound slots, see section ↑4.2.3, Renaming Sound
Slots.
Set Up a Sound as Send Effect on the Controller
First, select the first Plug-in slot of an empty Sound:
1. Press the CONTROL button to enter Control mode.
2. Press F3 to select the SOUND tab.
3. Press GROUP + the pad 9–16 corresponding to the Group containing the empty Sound
you want to use. If the Group in question is in another bank, before you select the Group
you first need to press GROUP + the Left or Right Arrow button below the display to
switch to the Group bank containing that Group.
4. Press SELECT + the unlit pad of the empty Sound you want to use (or simply hit its unlit
pad if pads are in Group mode).
5. Press NAV + F3 (PLUG-IN) to show the Plug-in slots of the selected Sound.
Since we have selected an empty Sound, while holding NAV you see (NONE) on the dis-
play (i.e. there is no Plug-ins to navigate yet).
→
Plug-in slot 1 is automatically selected since it’s the only existing Plug-in slot for now.
Now load the desired effect into that Plug-in slot:
1. Press SHIFT + BROWSE to browse Plug-ins.
2. Press F1 to select FILTER.
3. Press the Left Arrow button under the display to select 1/2: TYPE.
Using Effects
Creating a Send Effect
MASCHINE MIKRO - Manual - 605

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English