Native Instruments Maschine MIKRO User Manual

Parameter Description
SENSITIVITY (Detect
mode only)
When MODE is set to DETECT (see above), SENSITIVITY lets you
adjust the sensitivity of the transient detection. Higher values will
cause more Slices to be detected because more transients will be
recognized, lower values will result in less Slices. This parameter
should be adjusted until all the musically significant slices are being
detected in the waveform.
BPM (BPM Mode) Selects how the tempo is defined: If you select AUTO, MASCHINE
will calculate the tempo automatically. If you select MANUAL, you
can enter the tempo in BPM manually.
ADJUST If BPM is set to AUTO, you can choose between the tempo that
MASCHINE detected, or half or double of that tempo. If BPM is set
to MANUAL, you can adjust the tempo manually.
When MODE is set to DETECT, a second section of parameters is available at the bottom of the
display: the ENGINE section.
►
When MODE is set to DETECT, press NAV + the Right Arrow button to show the ENGINE
section.
The ENGINE section.
This ENGINE section contains a single parameter: ZERO-X.
Sampling and Sample Mapping
Slicing a Sample
MASCHINE MIKRO - Manual - 795

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English