89
5. TERMINAL SETUP – PORTAL
Terminal Setup
Adjusting Volume
Display example for adjusting volume levels.
To Adjust Handset Receiver Volume
The volume level of the handset receiver can be
adjusted during a call in progress using handset.
Press the Up /Down key in the Offhook status or during
a call when using the handset.
To Adjust Speaker Volume
The volume level of the speaker can be adjusted during
a call in progress using speaker.
Press the Up /Down key during speakerphone
operation or during a call using the speaker.
To Adjust Ringer Tone
The volume level of the ringer tone can be adjusted
during an incoming call arrival.
Press the Up /Down key during ringing.
Setup With Feature Key
Microphone On/Off
(1) LED on shows the status of the built-in
microphone.
(2) Press the MIC key or press and .
While you set up the terminal, the “soft key”
means local soft key.
Adjusting volume is available on the call screen
only.
■ If the Back/Exit button is pressed while the
Terminal Setting menu is displayed, the Favorite
screen is displayed regardless of Home screen
settings.
To Next Page
Loading...
Need help?
General