112
(4) Replace the handset.
Line key lamp goes off
The call is transferred.
Answer A Transferred Call (By Ex.210)
(1) A ringing is heard.
The Call Indicator lamp flashes.
The Line key lamp flashes red.
The extension number that initiates call transfer is
displayed on the LCD.
(2) Lift the handset to start a conversation with the
extension (200).
The Call Indicator lamp goes off.
The Line key lamp lights green.
One-Touch Speed Calling Keys
This feature allows a terminal user to dial frequently
called numbers by pressing a One-touch key assigned
for Station Speed Dialing.
To Program
Following explains how to register a phone number to a
One-touch Speed Calling key.
(1) Press the Feature key.
The Feature key lights red.
(2) Press the One-touch Speed Calling key.
The Feature key lamp flashes red.
The Speaker key lamp lights red.
(3) Dial the desired number.
The Feature key lamp lights red.
(4) Press the Feature key.
The Feature key lamp goes off.
The Speaker key lamp goes off.
To Verify
The following explains how to confirm the registered
number in the One-touch Speed Calling key.
(1) Press the Feature key.
The Feature key lights red.
If the destination party does not answer within
the predetermined time, a recall is made to the
terminal that initiated the call transfer. When
the recall is received, the destination number
is displayed on the LCD.
A maximum of 32 digits can be registered for
each dial number.
The feature key is set by system data setting at
initial installation. For details, contact the system
administrator.
If you dial a wrong number, you will need to
start again from the beginning.
To register a pause, press * or # between any
digits. (It is required system data setting at
initial installation.) The pause can not be
registered as a first digit.
If a phone number has been already
registered in One-touch key, that number is
displayed on the LCD. The previous number
will be cleared when you register a new
number.
To Next Page
Loading...
Need help?
General