143
9. CALL HISTORY OPERATION
This chapter explains Call History of DT930. By using
Call History, you can make a call with simple operation.
Call History allows the telephone to register up to 50
records into its memory. If the number of registered
records exceeds 50, a record will be deleted in order of
occurrence.
Note: Register Call History data to Personal Directory as
necessary. Call History data will be cleared when powering
off the telephone.
However, Call History data can be backed up to your PC.
About Backup/Restore, see Backup Personal Settings or
Restore Personal Settings in 3.TERMINAL SETUP –
CLASSIC.
Note: The Call History data that is stored in the memory of
each telephone cannot be added to Phonebook (both System
Phonebook and Local Phonebook) controlled by the system.
Note: On the Menu screen, use or softkey to move
the cursor up/down a line.
To View Call History
(1) Press the key.
When the menu screen is displayed, select
History, then press
(Enter) or the OK
softkey (or press
key). Or, press the List
softkey.
(2) Display an item from the history by pressing the
CID softkey.
(3) Detailed information of the last call is displayed.
Note: Use the Cursor key to display the next/former records.
Note: If no history data is saved, “LIST END” will be
displayed on the LCD.
To Make a Call from Call History
Note: While the history data is displayed, you cannot make
a call by dialing a telephone number.
(1) Press the key. The menu screen is
displayed.
(2) Select : History then press
(Enter) or
press
key.
(3) Press the Redial softkey.
Store
DEL
01:
2-9 10:42
2142622000
To Next Page
Loading...
Need help?
General