- 155 -
Appendix B. Web Programming
Web Programming allows you to configure the
terminal settings of DT930 from the PC. An web
browser (Internet Explorer, etc.) is used to access
Web Programming. It is not necessary to install
any special application software onto the PC.
Note: The DT930 and Web Programming PC need to be
connected to the same network. When downloading the files
for Music on Hold, Ringer Tone and Directory to the DT930,
FTP/TFTP/HTTPS server are required on the network. For
details on the FTP/TFTP/HTTPS server, contact to the
System Administrator.
Note: Terminal settings through Web Programming is
available while DT930 is logged into the system.
PC Requirements for Web Programming
Login
Follow the steps below to open the Web
Programming.
(1) Start up Internet browser on the PC.
(2) Enter IP address of the target DT930 on the
address toolbar and press Enter key.
(3) The Web Programming Login screen is
displayed. Enter a user name (type USER) and a
password (Note 1), then click the button.
Items Operating Conditions
Operating System
Microsoft
Windows
XP/Vista/
Windows
7
CPU Comply with conditions for use of
Microsoft
Windows or Microsoft
Internet Explorer.
Memory
Browser
Microsoft
Internet Explorer 6.0 or
later
Monitor [/ITK-24CG-1]
4.3 inch Color (16777216 colors)
TFT
Others
Mouse, LAN connection port
(RJ-45)
To Next Page
Loading...
Need help?
General