NEC ITK-24CG Series User Manual

91
1.
Set Ringer Tone
The procedure below shows how to change the ringer
tone for internal call and external call.
(1) Display the Menu screen, select Settings.
(2) Select User Settings.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(3) Select Incoming Call.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(4) Select Ring Tone.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press .
(5) Select External Call when setting the ringer
tone for external calls. Select Internal Call
when setting the ringer tone for internal calls.
Select an item by one of the following operations.
❍ Highlight an item by using , and press ,
or OK.
❍ Press or .
(6) Select a desired tone type. You can preview
designated ringer tone.
Select an item by one of the following operations.
❍ Highlight an item by using , and press or
OK.
❍ Press the digit key of desired number, and press
or OK.
For example, press + to select
Download 1.
Music Ring 1, 2 and 3 have been installed at
the factory with firmware 2.1.0.0 or later.
When using a ring tone music source other
than Music Ring 1, 2 or 3, you must download
the music file.
For the procedure to download a ringer tone
file, refer to “To Download a File”.
1
1
1
1
3
3
No. Menu Item
Frequency (Hz)
Remarks
1st 2nd
0 Automatic 520 660 16Hz modulation
1 Tone Type 1 520 660 16Hz modulation
2 Tone Type 2 520 660 8Hz modulation
3 Tone Type 3 1400 1100 Door Phone
4 Tone Type 4 1100 No modulation
5 Tone Type 5 540 No modulation
6 Tone Type 6 1100 1400 16Hz modulation
7 Tone Type 7 660 760 16Hz modulation
8 Tone Type 8 1100 Envelope
9 Tone Type 9 – Door Phone Melody
10 Tone Type 10 – Melody 1
11 Tone Type 11 – Melody 2
12 Tone Type 12 – Melody 3
1
2
1
2
1
5
15

NEC ITK-24CG Series Specifications

General

Brand	NEC
Model	ITK-24CG Series
Category	Telephone
Language	English