NEC ITK-24CG Series User Manual

139
1.
Make a Call from Directory
Note: While the Directory screen is being displayed, you
cannot make a call by dialing a telephone number.
(1) Press the key.
When the menu screen is displayed. Select
Directory then press
(Enter) or OK softkey
(or press the 2 key)
Or, press the following softkeys in the order listed:
↓ Prog ↑ TELBK).
(2) Select : Search then press
(Enter) or
press
key.
Note: The display will show No TELBK Data if there
are no entries to review.
(3) Select a search method (e.g., NAME, GRP, NUM
or MEM).
The following display is an example of dial
by name.
(4) Lift the Handset, press the key or MIC
key or press the Dial softkey while displaying the
detailed data for target party on LCD.
Note: If multiple telephone numbers are assigned
into a target party, a call is made to the first telephone
number.
To Set Prefix
When making a call, a prefix can be added to telephone
numbers to be dialed. Prefixes need to be set in
advance.
(1) Press the key. The menu screen is
displayed.
(2) Select Settings.
(3) Select User Settings then press (Enter),
(Right-cursor) or press key.
(4) Select Talk then press (Enter),
(Right-cursor) or press key.
(5) Select Prefix then press (Enter),
(Right-cursor) or press key.
(6) Select Prefix then press (Enter),
(Right-cursor) or press key.
(7) Enter a prefix using the digit keys. After entering
the prefix press (Enter).
2
2
1: REGIST
2: SEARCH
3: SETTING
4: DeleteAll
1: 2: 3: 4:
TLBK1: SEARCH NAME
<
NUM
[A]
MENU
[SEARCH MENU]
NAME
GRP
NUM
MEM
[1] NEC
2142622000
CHG
DEL
Dial
Speaker
1
1
2
2
5
5
1
1

NEC ITK-24CG Series Specifications

General

Brand	NEC
Model	ITK-24CG Series
Category	Telephone
Language	English