OTHER SCANNING METHODS
- 196 -
● OTHER SCANNING METHODS
Scanning Images Using the Remote
Scan Driver
One of the scan drivers included with the software DVD-ROM
is the Remote Scan driver. With this driver, you can perform
scanning operations remotely from your Windows computer
over the TCP/IP network. Your scans can be loaded to your
Windows computer running a TWAIN-compliant application.
Scanning Images Using the WIA
Driver
The the software DVD-ROM also includes the WIA Driver for
users of Windows XP/Windows Vista/Windows 7/Windows 8/
Windows Server 2003/Windows Server 2008/Windows Server
2012. This driver can be used together with a WIA-compliant
application, such as Microsoft Paint supported by Windows XP
or Windows Vista, to scan images on the equipment and load
them to your client computer.
• If only the Department Management features are enabled,
the department code needs to be entered.
For instructions on how to scan and acquire images to your
computer, refer to the documentation that comes with your
WIA-compliant application.
• If you are using Windows XP or Windows Server 2003,
follow the procedure below to register this equipment to the
WIA Driver after the installation of the driver.
1. Double-click [Scanners and Cameras] of [Control
Panel].
2. Right-click [WIA] and then click [Properties].
3. Click [Discover] on the [Device Setting] tab menu.
4. Click [Start Discovery].
5. Select this equipment and then click [OK].
6. Click [OK].
Originals
Connecting over TCP/IP Network
Scan originals remotely using the
Remote Scan driver
Windows XP
Windows Vista
Windows 7
Windows 8
Windows Server 2003
Windows Server 2008
Windows Server 2012
Import your scans to a
TWAIN-compliant application
Originals
Connecting over TCP/IP Network
Scan originals using the WIA Driver
Windows XP
Windows Vista
Windows 7
Windows 8
Windows Server 2003
Windows Server 2008
Windows Server 2012
Import your scans to a
WIA-compliant application
To Next Page
Loading...
Need help?
General
