Oki mc760x User Manual

SETTING ITEMS (USER)
- 249 -
2
1
3
4
5
6
7
CHECK E-MAIL
You can check for new E-mails (Internet Faxes) on the POP3
server. If a new E-mail is on the POP3 server, the equipment
automatically prints the E-mail data after retrieving them from
the POP3 server.
Note
• To perform this operation, the POP3 server must be
configured using TopAccess. For instructions on how to
configure the POP3 server, refer to the TopAccess Guide
“Chapter 8: [Administration] Tab Page”.
Memo
• For instructions on how to display the CHECK E-MAIL
screen, see the following page:
 P.229 "Accessing the User Menu"
• The equipment can also automatically check for new E-
mails (Internet Faxes) on the POP3 server.
CHANGE USER PASSWORD
When the MFP Local Authentication function is enabled, users
can change their authentication password that has been
entered in the authentication screen from this menu.
Memo
• [CHANGE USER PASSWORD] is available only when the
MFP Local Authentication function is enabled.
• For instructions on how to display the CHANGE USER
PASSWORD screen, see the following page:
 P.229 "Accessing the User Menu"
1
Change the password.
1) Press [OLD PASSWORD] to enter the current
password.
2) Press [NEW PASSWORD] to enter the new
password.
3) Press [RETYPE NEW PASSWORD] to enter the
new password again.
4) Press [OK] to save the new password.
You will be returned to the USER menu screen.
Memo
• When you press [OLD PASSWORD], [NEW
PASSWORD], or [RETYPE NEW PASSWORD], the
on-screen keyboard is displayed.
For details of the on-screen keyboard, see the
following page:
 P.320 "On-screen keyboard"
• The input password appears as asterisks (*) in the
[OLD PASSWORD], [NEW PASSWORD], and
[RETYPE NEW PASSWORD] boxes.

Oki mc760x Specifications

General

Brand	Oki
Model	mc760x
Category	All in One Printer
Language	English