Oki mc760x User Manual

SETTING ITEMS (ADMIN)
- 257 -
2
1
3
4
5
6
7
*2 The target protocols are IPX/SPX, AppleTalk and so
on.
For details, refer to the TopAccess Guide “Chapter
8: [Administration] Tab Page - [Setup] Item List”.
Memo
• The settable times are described below.
-1 min.
-3 mins.
-5 mins.
- 10 mins.
- 15 mins.
- 20 mins.
- 25 mins.
- 30 mins.
- 40 mins.
- 50 mins.
- 60 mins.
Note
• The equipment may not enter the Sleep mode at the
set timing depending on its operating status.
• The machine is not switched to the Sleep mode in the
following cases:
- A particular option is installed. (Wireless LAN
module, e-BRIDGE ID Gate)
- The IPsec function is enabled.
- IEEE 802.1X authentication is enabled.
- IPv6 is enabled and the IPv6 address is set other
than manually.
- POP3 client setting is enabled and under any of the
following conditions:
(1) The scan rate is set to other than 0 minute.
(2) A POP3 server address is entered.
(3) An account name is entered.
- A particular network protocol is enabled. (AppleTalk,
IPX/SPX)
• Protocol settings for recovering this equipment from
the Auto Sleep mode are made in the TopAccess
administrator mode. For details, refer to the
TopAccess Guide “Chapter 8: [Administration] Tab
Page”.
• By default, the Power Save period is set to 1 min and
the Sleep period is set to 1 min.
Setting the calibration display level
You can set whether this equipment will use the calibration
setting set by a user or the administrator.
The relevant buttons ([CALIBRATION]) will appear under the
ADMIN menu only or under both the
USER and ADMIN menus according to this setting.
Setting the calibration
You can automatically calibrate the color gradation when the
shading and hue are not reproduced accurately in the images
scanned by this machine.
Note
• Whether to allow calibration by not only administrators but
also users, is set by DISPLAY LEVEL.
 P.257 "Setting the calibration display level"
• Place LT or A4 paper (recommended paper) in the tray
before starting the calibration. If any other paper is used,
calibration may not be performed properly.
• If the glass is dirty or any foreign objects are stuck to it,
calibration may not be performed properly. Keep the glass
clean.
• Do not raise the original cover or the Reversing Automatic
Document Feeder
*1
, or open the front cover while the
calibration is in progress. If this does happen, calibration
cannot be finished properly.
• Interrupt copying is not available during the calibration.
• If the color often deviates, call your dealer.
*1 The Reversing Automatic Document Feeder is an option depending on
the model.
Memo
• For instructions on how to display the CALIBRATION
screen, see the following page:
 P.229 "Accessing the User Menu"
1
Press the button to calibrate.
Note
• The available buttons differ depending on the model.
Item name Description
CALIBRATION • USER — Press this button to display
[CALIBRATION] in the ADMIN menu
as well as the USER menu
• ADMIN — Press this button to display
[CALIBRATION] in the ADMIN menu
Item name Description
COPY Press this button to calibrate for
copy jobs.
600 dpi PRINT Press this button to calibrate for 600
dpi print jobs.
1200 dpi PRINT Press this button to calibrate for
1200 dpi print jobs.

Oki mc760x Specifications

General

Brand	Oki
Model	mc760x
Category	All in One Printer
Language	English