Oki mc760x User Manual

SETTING ITEMS (USER)
- 240 -
2
1
3
4
5
6
7
Note
• To register E-mail addresses specified as Bcc contacts
into the address book from the scan log, it is necessary
to enable the [BCC Address Display] option from the
TopAccess - Email menu. If the [BCC Address Display]
option is disabled, the description [BCC Address] is
displayed on the Scan Log screen instead of an E-mail
address. In this case, [ENTRY] is disabled even if you
select the description [BCC Address]. For instructions
on how to enable the [BCC Address Display] option,
refer to the TopAccess Guide “Chapter 8: SETTING
ITEMS”.
4
Edit the contact information.
For the description of each item, see step 2 of the
following operation:
 P.238 "Registering contacts from the SETTING using
[ADDRESS] button"
5
Press [OPTION] to specify the default
settings for fax transmission.
Note
• This step is available only when the FAX Unit is
installed.
6
Press [OK] to register the contact.
The contact is registered in the address book.
 Editing or deleting contacts
You can edit (or delete) contact information registered in the
address book.
1
On the ADDRESS BOOK screen, press the
contact that you want to edit and press
[EDIT].
The ADDRESS BOOK EDIT screen is displayed.
Note
• If the touch panel does not display the contact you
want to edit, press to display the next page.
• The search function allows you to quickly search for
the contact you want to edit. To search for the contact,
see the following page:
 P.241 "Searching for contacts"
To delete, press the contact you want to delete, and then
[DELETE].
The message “Delete OK?” is displayed on the
ATTENTION screen.
Press [YES] to delete the contact.
2
Edit the contact information.

Oki mc760x Specifications

General

Brand	Oki
Model	mc760x
Category	All in One Printer
Language	English