Specifications and Dimensions
472
FQ2 User’s Manual
12-3 Specifications and Dimensions
Sensor
Specifications
Item Single-function
models
Standard mod-
els
High-resolution models
Model NPN FQ2-
S10@@@@
FQ2-
S20@@@@
FQ2-
S30@@@@-08
FQ2-
S30@@@@-08M
FQ2-S30-13 FQ2-S30-
13M
PNP FQ2-
S15@@@@
FQ2-
S25@@@@
FQ2-
S35@@@@-08
FQ2-
S35@@@@-08M
FQ2-S35-13 FQ2-S35-
13M
Field of view Refer to Table 1. Lens is select according to
the field of vision and installa-
tion distance. Refer to the
Optical Chart page.
Installation distance Refer to Table 1.
Main func-
tions
Inspection items Search, shape search II, sensitive search, area, color data, edge position, edge pitch, edge width, and
labeling
Number of
simultaneous
measurements
132
Position com-
pensation
Supported (360° Model position compensation, Edge position compensation)
Number of reg-
istered scenes
832
Calibration Supported
Image
input
Image process-
ing method
Real color Monochrome Real color Monochrome
Image filter High dynamic range (HDR), image adjustment, polarizing filter (attachment), and white balance (Sen-
sors with Color Cameras only)
Image elements 1/3-inch color CMOS 1/2-inch color
CMOS
1/2-inch Mono-
chrome CMOS
1/2-inch color
CMOS
1/2-inch
Monochrome
CMOS
Shutter
Built-in lighting lit: 1/250 to 1/50,000
Built-in lighting not lit: 1/1 to 1/50,000
Built-in lighting lit: 1/250 to 1/60,000
Built-in lighting not lit: 1/1 to 1/60,000
1/1 to 1/60,000
Processing res-
olution
752×480 928×828 1280×1024
Partial input
function
Supported horizontally only. Supported horizontally and vertically
Lens mounts --- C-mounts
Lighting Lighting method Pulse ---
Lighting color White ---
Data log-
ging
Measurement
data
In Sensor: 1,000 items (If a Touch Finder is used, results can be saved up to the capacity of an SD
card.)
Images In Sensor: 20 images (If a Touch Finder is used, images can be saved up to the capacity of an SD card.)
Auxiliary function Math (arithmetic, calculation functions, trigonometric functions, and logic functions)
Measurement trigger External trigger (single or continuous)
Communications trigger (Ethernet TCP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, or
PLC Link)