Omron J1000 User Manual

4.2 Using the Digital LED Operator
Use the LED operator to enter run and stop commands, display data, edit parameters, as well as display fault and alarm
information.
u
Keys, Displays, and LEDs
P
9
5
1
2
3
6
7
8
10
STOP
11
14
12
13
15
4
J1000
STOP
据据据据据据据据据据据据据据据据据据据据据据据据
据据据据据据据据据据据
5
据据据据据据据据据据据据
据据据据据据据
400V
据据据据据据据据据据据据据据据据据据据据
据据据据据据据据据据据据据据据据据据据据据
据据据据据据据据据据据据据据据
据据据
Read manual before installing.
Wait 5 minutes for capacitor discharge after
disconnecting power supply.
To conform to requirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
WARNING
1
据据据据据
2
据据据据据据
3
据据据据据
4
据据据据
5
据据据据
:
:
:
:
:
:
:
:
:
6
据据据
7
据据据据据
8
据据据据据据
9
据据据据据据据
Table 4.1 Keys and Displays on the LED Operator
No. Display Name Function
1 Data Display Area Displays the frequency reference, parameter number, etc.
2 ESC Key Returns to the previous menu.
3 RESET Key
Moves the cursor to the right.
Resets the drive to clear a fault situation.
4 RUN Key Starts the drive.
5 Up Arrow Key Scrolls up to select parameter numbers, setting values, etc.
6 Down Arrow Key Scrolls down to select parameter numbers, setting values, etc.
7
STOP
STOP Key
Stops the drive.
Note:
Stop priority circuit. A fast-stop is available by pressing the STOP key when
the drive detects a danger even if the drive is running by a signal from the multi-
function contact input terminal (REMOTE is set). To avoid stoppage by using the
STOP key, set o2-02 (STOP Key Function Selection) to 0 (Disabled).
8 ENTER Key
Selects all modes, parameters, settings, etc.
Selects a menu item to move from one display screen to the next.
9 LO/RE Selection Key
Switches drive control between the operator (LOCAL) and the control circuit
terminals (REMOTE).
Note: LOCAL/REMOTE key effective during stop in drive mode.
10 RUN Light Lit while the drive is operating the motor.
11 LO/RE Light Lit while the operator (LOCAL) is selected to run the drive.
4.2 Using the Digital LED Operator
54
SIEP C710606 33A OYMC AC Drive – J1000 User Manual

Omron J1000 Specifications

General

Brand	Omron
Model	J1000
Category	Inverter
Language	English