Omron SYSMAC CP2E-E D Series User Manual

7 PLC Setup
7-6
CP2E CPU Unit Software User’s Manual(W614)
22-3 RS-232C (No-protocol) Settings
2-3-1 Baud 9,600 bps 1,200 bps When power is turned ON
2,400 bps
4,800 bps
9,600 bps
19,200 bps
38,400 bps
57,600 bps
115,200 bps
2-3-2 Format
(data length, stop bits, par-
ity)
7 bits, 2 bits, even 7 bits, 2 bits, even When power is turned ON
7 bits, 2 bits, odd
7 bits, 2 bits, no parity
7 bits, 1 bit, even
7 bits, 1 bit, odd
7 bits, 1 bit, no parity
8 bits, 2 bits, even
8 bits, 2 bits, odd
8 bits, 2 bits, no parity
8 bits, 1 bit, even
8 bits, 1 bit, odd
8 bits, 1 bit, no parity
2-3-3 Start Code Disable. Disable. When power is turned ON
Set.
2-3-4 Start Code (setting) 00 Hex 00 Hex When power is turned ON
:
FF hex
2-3-5 End Code None
(Received Bytes)
Received Bytes (no end code) When power is turned ON
CR, LF
Set End Code
2-3-6 Received Bytes
(setting)
256 bytes 256 bytes When power is turned ON
1 byte
:
255 bytes
2-3-7 Set End Code
(setting)
00 Hex 00 Hex When power is turned ON
:
FF Hex
2-3-8 Delay 0 ms 0 (×10 ms) When power is turned ON
:
9999 (×10 ms)
2-5 Modbus-RTU Easy Master Settings
2-5-1 Baud 9,600 bps 1,200 bps When power is turned ON
2,400 bps
4,800 bps
9,600 bps
19,200 bps
38,400 bps
57,600 bps
115,200 bps
Name Default Possible settings
When setting is read by
CPU Unit

Omron SYSMAC CP2E-E D Series Specifications

General

Brand	Omron
Model	SYSMAC CP2E-E D Series
Category	Computer Hardware
Language	English