12 Pulse Outputs
12-18
CP2E CPU Unit Software User’s Manual(W614)
Precautions for Correct UsePrecautions for Correct Use
The absolute pulse cannot be specified with the origin undefined. Please specify them when the
origin is defined by performing the origin searches.
Additional Information
The origin position is undefined in the following case. Please define the origin position by per-
forming the origin searches again.
• When the pulse output reset flag is turned ON
• When the RUN or MONITOR mode is changed to the PROGRAM mode
When the start input (CIO 0.00) goes ON, this example program outputs 600,000 pulses from pulse
output 1 to turn the motor.
PLS2
z PLC Setup
There are no settings that need to be made in the PLC Setup.
12-2-3 Application Example
Specifications and Operation
Applicable Instructions
Preparations
0.00
200Hz/4ms
100Hz
50,000 Hz
300Hz/4ms
Target frequency
Starting frequency
Start input
Acceleration
rate
Number of output
pulses
600,000 pulses
Deceleration rate
To Next Page
Loading...
Need help?
General
