Omron SYSMAC CP2E-E D Series User Manual

14 Serial Communications
14-18
CP2E CPU Unit Software User’s Manual(W614)
A bobbin winder on a spinning machine will be used in the following example.
The speed of the bobbin winder must be controlled as the thread is wound because the speed of the
thread is constant.
The start/stop and target speed is changed according to inputs from multiple contacts. Acceleration and
deceleration are controlled using the acceleration and deceleration of an inverter.
14-4-4 Programming Examples
Initial frequency setting
W0.00: ON
RUN Command
W1.00
Frequency
setting
60.00Hz 55.00Hz 50.00Hz
Constant thread speed
Fast rotation Slow rotation
Frequency
setting A
W0.01: ON
Frequency
setting B
W0.02: ON

Omron SYSMAC CP2E-E D Series Specifications

General

Brand	Omron
Model	SYSMAC CP2E-E D Series
Category	Computer Hardware
Language	English