Omron SYSMAC CP2E-E D Series User Manual

15-7
15 Ethernet
CP2E CPU Unit Software User’s Manual(W614)
15-2 Specifications
15
15-2-1 General Specifications (Ethernet)
15-2 Specifications
z Switching Hub for CP2E N30/40/60 CPU Units
Additional Information
The switching hub function works normally even if a fatal/non-fatal error or CPU WDT error
occurs. The switching hub function does not work when the power of the CPU Unit is turned
OFF.
15-2-1 General Specifications (Ethernet)
Item Specifications
Type 100/10Base-TX (Auto-MDIX)
Transfer Media access method CSMA/CD
Modulation method Baseband
Transmission paths Star form
Baud rate 100 Mbit/s (100Base-TX) 10 Mbit/s (10Base-T)
• Half/full auto-negotiation for each port
• Link speed auto-sensing for each port
Transmission media • Unshielded twisted-pair (UDP)
cable
Categories: 5, 5e
• Shielded twisted-pair (STP) cable
Categories: 100Ω at 5, 5e
• Unshielded twisted-pair (UDP)
cable
Categories: 3, 4, 5, 5e
• Shielded twisted-pair (STP) cable
Categories: 100Ω at 3, 4, 5, 5e
Transmission distance 100 m (distance between hub and node)
Cascade connection There is no limitation on the usage of switching hub
Protocols TCP, UDP, ARP, ICMP (ping only), SNTP, DNS
Applications FINS, Socket, SNTP, DNS (Client)
Ethernet 100Base-TX, 10Base-T
Auto MID/MID-X Yes
Auto negotiation Yes
Store-and-forward system Yes
Buffer 32K bytes
MAC address 1000
Broadcast storm detection Yes
QoS No
SNMP No
VLAN No
IGMP snooping No
STP (Spanning Tree Protocol) No
Port mirroring No

Omron SYSMAC CP2E-E D Series Specifications

General

Brand	Omron
Model	SYSMAC CP2E-E D Series
Category	Computer Hardware
Language	English