Polaris 2013 RANGER RZR S User Manual

5.4
BODY / STEERING / SUSPENSION
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
CAB FRAME (RZR / RZR S)
Assembly / Removal
NOTE: Finger tighten all components until cab
frame is completely assembled on vehicle, then
tighten to specifications listed.
1. Assemble the rear cab frame and the front cab frame
a
t the coupler joints and secure with four (3/8-16 x 1
1/4) screws and (3/8-16 Nyloc) nuts. Tighten screws
to specification.
2. Place the assembled cab frame onto the vehicle and
a
lign the rear mount holes. Fasten the rear cab frame
brackets to vehicle with four (M10x1.5x25) bolts and
(M10x1.5) nuts. Tighten bolts to specification. Fasten
the two self-tapping screws to the rear inner portion
of the bracket on each side. Tighten screws to
specification.
3. Place the straps from the safety net over the front
cou
pler posts.
4. Fasten the front of the cab frame to the base brackets
a
nd secure with four (3/8-16 x 1 1/4) screws and (3/
8-16 Nyloc) nuts. Tighten screws to specification.
5. Attach side bars to cab frame using M6 screws and
nuts o
n top and M8 screws and nuts on the bottom.
Tighten to specification.
6. To remove the cab frame, reverse the assembly
pro
cedure (steps 1-5).
= T
Screws:
25-28 ft-lbs (34-38 Nm)
= T
Bolts:
30 ft-lbs (41 Nm)
= T
Screws:
15 ft-lbs (20 Nm)
= T
Screws:
25-28 ft-lbs (34-38 Nm)
= T
Screws:
8-10 ft-lbs (10.8-13.5 Nm)
PRELIMINARY VERSION

Polaris 2013 RANGER RZR S Specifications

General

Brand	Polaris
Model	2013 RANGER RZR S
Category	Offroad Vehicle
Language	English