Polaris 2013 RANGER RZR S User Manual

10.36
ELECTRICAL
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Starter Installation
1. Lubricate and install a new O-ring (B) onto the starter
motor.
2. Install the starter motor onto the engine.
3. Install the upper and lower starter mounting bolts by
hand.
4. Torque the upper starter mounting bolt to
specification.
5. Torque the lower starter mounting bolt to
specification.
6. Install the negative (-) battery cable to the lower
mounting bolt. Install battery cable nut and torque to
specification.
7. Install the positive (+) battery cable to the starter
motor.
8. Install seat base and connect the battery.
Starter Drive Bendix
The engine’s stator cover must be removed in order to
service the starter drive bendix. Refer to “Starter Drive
Bendix Removal / Installation”, located in Chapter 3.
= T
Starter Motor Mounting Bolts:
7 ft-lbs (9.5 Nm)
B
A
A. Gear Assembly 
B. Thrust Washer 
C. Busing 
D. Retaining Ring 
E. Thrust Washer 
F. Stopper 
G. Cover 
H. Spring
A
B
C
D
E
F
G
H

Polaris 2013 RANGER RZR S Specifications

General

Brand	Polaris
Model	2013 RANGER RZR S
Category	Offroad Vehicle
Language	English