To Next Page

To Previous Page

5.30

BODY / STEERING / SUSPENSION

9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual

Steering Wheel Removal (EPS Models)

1. Remove the upper steering shaft, pivot tube and

steering wheel as an assembly before attempting to

remove the steering wheel. Refer to “Upper Steering

Shaft Removal (EPS Models)”.

2. Remove the steering wheel cap.

3. Loosen the nut and back it half way off the steering

shaf

4. Place the assembly in a vise.

5. Using a large bronze drift

and hammer, strike the

steering shaft nut to pop the steering wheel off the

shaft taper.

6. Once the steering wheel pops loose, completely

rem

ove the nut and lift the steering wheel off the shaft.

Power Steering Unit Removal

1. Remove the upper steering shaft, pivot tube and

steering wheel from the vehicle as an assembly.

Refer to “Upper Steering Shaft Removal (EPS

Models)”.

2. Disconnect the (2) electrical harnesses from the

power

steering unit.

CAUTION

Striking the steering wheel or steering shaft

while installed in the vehicle can permanently

damage the EPS unit and cause a

Power Steering Fault.

CAUTION

Striking the steering wheel or steering shaft

while installed in the vehicle can permanently

damage the EPS unit and cause a

Power Steering Fault.

Remove

PRELIMINARY VERSION

Polaris 2013 RANGER RZR S User Manual

Questions and Answers: