To Next Page

To Previous Page

7.37

FINAL DRIVE

9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual

REAR GEARCASE

Gearcase Removal

1. Drain the fluid from the rear gearcase and remove the

rear drive shafts from each side of the rear gearcase.

See “REAR DRIVE SHAFT” on page 7.29

2. Remove the exhaust pipe and exhaust silencer to

llow for gearcase removal.

3. RZR S Only: Rem

ove the upper A-arm bolts, lower

rear A-arm bolts, and suspension plate. NOTE: If

accessory rear rack cab frame is installed, remove

the (4) bolts retaining it to the rear suspension

plate (see photo).

4. Remove the (2) rear gearcase mount bracket

steners and mount bolt and remove bracket from

vehicle.

5. Remove the fasteners and bracket that secure the

ear gearcase to the transmission.

6. Remove the (4) fasteners and remove the rear mount

om the rear gearcase.

Silencer

Remove

Suspension

Plate

Remove

PRELIMINARY VERSION

Polaris 2013 RANGER RZR S User Manual

Questions and Answers: