Polaris 2013 RANGER RZR S User Manual

3.13
ENGINE / COOLING
3
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Radiator Removal
1. Remove the hood from the front cab.
2. Slowly remove the pressure cap to relieve any cooling
sys
tem pressure.
3. Place a suitable drain pan underneath the radiator
fittin
g on the front RH side of the vehicle.
4. Drain the coolant from the radiator by removing the
lo
wer coolant hose from the radiator as shown.
Properly dispose of the coolant.
5. Allow coolant to completely drain.
6. Remove the front bumper (see Chapter 5).
7. Remove the upper engine outlet hose and recovery
ho
se from the top of the radiator.
8. Remove the (2) upper radiator retaining bolts and the
(
4) bolts retaining the lower radiator mount bracket.
Remove the bracket from the frame.
9. Disconnect the fan motor and remove the radiator
fro
m the vehicle. Take care not to damage the cooling
fins.
10. Reverse procedure for installation.
WARNING
Never drain the coolant when the engine and
radiator are warm or hot. Hot coolant can cause
severe burns. Allow engine and radiator to cool.
Drain Here
Recovery
Engine
T-Fitting
Radiator
Fan Motor Asm.
Screws
Grommets
Inserts
Hose
Outlet Hose
Engine
Inlet Hose
PRELIMINARY VERSION

Polaris 2013 RANGER RZR S Specifications

General

Brand	Polaris
Model	2013 RANGER RZR S
Category	Offroad Vehicle
Language	English