Polaris 2013 RANGER RZR S User Manual

10.21
ELECTRICAL
10
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
TAIL / BRAKE LIGHTS
Bulb Replacement
Before replacing the bulb(s), use a digital multi-meter to
test the harness to ensure the lamp is receiving 12 volts
and that a ground path is present.
If a tail light, brake light or turn signal (INT’L Only) does not
work the bulb may need to be replaced.
1. Disconnect the wire harness.
2. Remove bulb by turning the rubber base 1/4 turn and
pulling the bulb out. Replace it with recommended
bulb. Apply Dielectric Grease (PN 2871329).
3. Connect the wire harness.
4. Test the tail light, brake light and turn signal (INT’L
Only) to verify it is working properly.
Tail / Brake
Light
Tail / Brake
Light
Turn Signal
Light
INT’L
Models

Polaris 2013 RANGER RZR S Specifications

General

Brand	Polaris
Model	2013 RANGER RZR S
Category	Offroad Vehicle
Language	English