7.53
FINAL DRIVE
7
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Gearcase Installation
1. Install the rear gearcase by reversing the procedure
listed under “REAR GEARCASE - Gearcase
Removal” at the beginning of this section.
IMPORTANT: When reinstalling the transmission to
re
ar gearcase mount bracket, it is extremely important
to torque all (7) fasteners to specification. Refer to the
“Installation” procedure listed on page 4.14.
NOTE: Special tool (PA-48873) will be required to
t
orque the mounting bracket fasteners when the
transmission and rear gearcase are installed in the
vehicle. Refer to the “Installation” procedure listed
on page 4.14.
2. Add Polaris ATV Angle Drive Fluid to rear gearcase.
Refer
to maintenance information in Chapter 2 for
more details. Torque drain and fill plugs to
specification.
Rear Gearcase Capacity:
22 fl. oz. (650 ml)
or to bottom of fill plug hole threads
See Chapter 2
Drain / Fill Plug:
Drain Plug - 30-45 in-lbs (3-5 Nm)
Fill Plug - 40 ft-lbs (54 Nm)
To Next Page
Loading...
Need help?
General
