Polaris 2013 RANGER RZR S User Manual

2.29
MAINTENANCE
2
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Tire Inspection
• Improper tire inflation may affect vehicle
maneuverability.
• When replacing a tire always use original
equ
ipment size and type.
• The use of non-standard size or type tires may
af
fect vehicle handling.
Tire Tread Depth
Replace tires when tread depth is worn to 1/8" (3 mm) or
les
s.
Tire Pressure
Remove the valve stem cap and check tire pressure using
the tire pressure gauge included in the vehicle’s tool kit.
Drive Shaft Boot Inspection
Inspect the drive shaft boots for damage, tears, wear or
leaking grease. If the boots exhibit any of these symptoms,
they should be replaced. Refer to Chapter 7 for drive shaft
boot replacement.
WARNING
Operating with worn tires will increase the
possibility of the vehicle skidding easily with
possible loss of control.
Worn tires can cause an accident.
Always replace tires when the tread depth
mea
sures 1/8", (.3 cm) or less.
Tread
Depth 1/8" (3 mm)
CAUTION
Maintain proper tire pressure.
Refer to the warning tire pressure decal
applied to the vehicle.
RZR / RZR S
Tire Pressure Inspection (Cold)
Front Rear
8 psi (55 kPa) 8 psi (55 kPa)
RZR 4
Tire Pressure Inspection (Cold)
Front Rear
10 psi (69 kPa) 12 psi (83 kPa)
Front Boots
Rear Boots
PRELIMINARY VERSION

Polaris 2013 RANGER RZR S Specifications

General

Brand	Polaris
Model	2013 RANGER RZR S
Category	Offroad Vehicle
Language	English