Polaris 2013 RANGER RZR S User Manual

6.23
CLUTCHING
6
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
9. Inspect the bearings inside the moveable sheave.
10. Inspect driven clutch sheave faces for wear or
d
amage.
11. Clean and inspect splines on helix and transmission
in
put shaft.
12. Lube splines with a light
film of grease. Do not
lubricate the bearings!
Clutch Assembly
1. Install the inner spring retainer if removed. Do not
apply oil or grease to the bearings.
2. Align the “X” marks on each of the sheaves during
reas
sembly.
3. Install the spring into the inner retainer.
4. Install the spacer over the shaft.
Moveable Sheave Bearing Inspection:
Replace the clutch assembly if
more brass than
Teflon™ is visible on the bearing.
Inspect Bearings for Wear
Assemble Sheaves
PRELIMINARY VERSION

Polaris 2013 RANGER RZR S Specifications

General

Brand	Polaris
Model	2013 RANGER RZR S
Category	Offroad Vehicle
Language	English