Quantum Scalar i6000 Installation Guide

188 Configuring the Library
Performing Simple Partition Resource Allocation
This procedure continues from Step 9 on page 187 on page 185 above.
1 In the Choose Resource Quantities dialog box, enter the number of elements to include in the partition
by specifying:
• Number of drives
• Number of storage slots
• Number of I/E station slots
The quantity available for each type of resource element indicates resources not already assigned to
existing partitions. Storage slot quantity is limited by the total slots authorized in the capacity on demand
license.
2 Click Next to proceed.
3 In the Partitions – Summary Information dialog box, verify that the parameters you set are correct.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing