Quantum Scalar i6000 Installation Guide

Scalar i6000 Installation Guide 351
Interpreting LED Codes
Blade status and Fibre port link LEDs can provide you with useful information to help you assess the state
of a library component. The primary library LEDs can be broken down into four groups based on behavior.
LEDs can help you assess the state of a library component. The primary library LEDs can be grouped as
follows:
• Interpreting Blade Status LEDs
on page 351
• Interpreting Drive Status LEDs
on page 354
• Interpreting Fibre Port Link LEDs
on page 356
• Ethernet Expansion Blade LEDs
on page 359
• Interpreting MCB Port LEDs
on page 360
• Interpreting LBX Terminator LEDs
on page 362
• Interpreting Power Supply LEDs
on page 364
Interpreting Blade Status LEDs
Each of the following library blades has a set of green, amber, and blue LEDs that indicate blade processor
status, health status, and power control status:
• Management control blade (MCB)
• Control management blade (CMB)
• Fibre Channel (FC) I/O blade
• Robotics control unit (RCU)
• Library motor drive (LMD)

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing