Quantum Scalar i6000 Installation Guide

Scalar i6000 Installation Guide 13
Required Tools
Table 1 provides a list of the tools needed to install a library.
Table 1 Required Tools for Installing a Library
Tool Type Tool Sizes
Open end wrenches • 24 mm
•16 mm
•13 mm
• 8 mm
•7 mm
Hex wrenches • 6 mm
•4 mm
•3 mm
• 2.5 mm
•2 mm
Screw drivers • #1 Phillips
• #2 Phillips
• Flat head
Pliers and wire cutters • Needle nose pliers
• Standard pliers
• Wire cutters
Nut drivers • 8 mm
•7 mm
Miscellaneous tools • Measuring tape
• Laptop computer
• Digital volt meter
• Digital level
• X-axis rail alignment tool (part number 3-00147-01)
• ESD wrist strap
• Metric ruler
• Small zip ties (quantity 100)
• Flashlight

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing