226 Configuring the Library
Configuring Screen Saver Preferences
Use the Screen Saver preferences tab to customize the images that display on the LMC screen when the
library is not in use. The screen saver starts automatically if the library is idle for a specified amount of time.
1 From the menu bar, click Setup→ Preferences.
The Preferences dialog box appears with the Screen Saver tab displayed.
2 Do one of the following:
•Select Default to use the default Quantum screen saver with standard settings.
•Select Custom to change screen saver settings such as activation, movement, or images.
•Select Off to disable the screen saver. (The current settings are cleared.)
If you selected Custom, go to Step 3
on page 226. Otherwise, go to Step 6 on page 227.
3 Under Activation, enter a value in the Wait box to specify how much idle time must pass before the
screen saver is activated.
The activation wait time can be 1–120 minutes.
4 Under Movement, specify the position and the motion of the screen saver image on the screen.
•Select Random to display the screen saver image in a variety of positions.
•Select Stationary to display a static screen saver image that does not move.
Screen saver preferences can only be configured remotely, not using the touch
panel.
To Next Page
Loading...
Need help?
General